VOC Compliant thinner for alkyd and epoxy coatings and for removing contaminants and cleaning equipment.

Specially formulated for use with urethane coatings, this thinner will remove grease, oil, and adhesives. Can also be used with epoxy coatings

PITTHANE®ULTRA 95-812 SERIES Two-component, gloss acrylic aliphatic urethane. High gloss topcoat with unlimited recoatability. Outstanding weather resistance with excellent color and gloss retention. VOC compliant for 2.08 VOC requirements. Tough, flexible and abrasion resistant.

PITTHANE®ULTRA 95-812 SERIES Two-component, gloss acrylic aliphatic urethane. High gloss topcoat with unlimited recoatability. Outstanding weather resistance with excellent color and gloss retention. VOC compliant for 2.08 VOC requirements. Tough, flexible and abrasion resistant.

ACRYLITHANE HS URETHANE ENAMEL is a high performance, two component coating for use where appearance, durability, color and gloss retention plus chemical and corrosion resistance are paramount. For use on automobiles, trucks, trailers, railway cars, service stations, bulk tanks or chemical (acid or caustic) trailers.

ACRYLITHANE 2.8 is a high performance, two component coating for use where appearance, durability, color and gloss retention plus chemical and corrosion resistance are paramount. For use on automobiles, trucks, trailers, railway cars, service stations, bulk tanks or chemical (acid or caustic) trailers.

DURETHANE® DTM is a surface tolerant, high solids, high build,two component acrylic urethane formulated for direct-to-metal applications. This product is compliant for applications in areas with VOC requirements of less than 250 g/L (2.08 lbs./gal.).

ACRYLITHANE 2.8 is a high performance, two component coating for use where appearance, durability, color and gloss retention plus chemical and corrosion resistance are paramount. For use on automobiles, trucks, trailers, railway cars, service stations, bulk tanks or chemical (acid or caustic) trailers.

ACRYLITHANE HS2 URETHANE ENAMEL is a high performance, two component coating for use where appearance, durability, color and gloss retention plus chemical and corrosion resistance are paramount. For use on automobiles, trucks, trailers, railway cars, service stations, bulk tanks or chemical (acid or caustic) trailers.

PITTHANE®ULTRA 95-812 SERIES Two-component, gloss acrylic aliphatic urethane. High gloss topcoat with unlimited recoatability. Outstanding weather resistance with excellent color and gloss retention. VOC compliant for 2.08 VOC requirements. Tough, flexible and abrasion resistant.

PITTHANE®ULTRA 95-812 SERIES Two-component, gloss acrylic aliphatic urethane. High gloss topcoat with unlimited recoatability. Outstanding weather resistance with excellent color and gloss retention. VOC compliant for 2.08 VOC requirements. Tough, flexible and abrasion resistant.

PITTHANE®ULTRA 95-812 SERIES Two-component, gloss acrylic aliphatic urethane. High gloss topcoat with unlimited recoatability. Outstanding weather resistance with excellent color and gloss retention. VOC compliant for 2.08 VOC requirements. Tough, flexible and abrasion resistant.

High solids, high-build, direct-to-metal (DTM) acrylic urethane provides the ultimate corrosion protection for excellent long term appearance in aggressive environments.  Self-priming with excellent adhesion and coverage in one coat.  Extremely durable for superior color and gloss retention compared to other DTM Urethanes.  Low temperature cure down to 32 degrees F (0 C).  Excellent sag resistance ( Can be applied at high film builds, 3-5 mils recommended DFT). Accelerator available to speed drying time.  Meets USDA requirements for incidental food contact.

High solids, high-build, direct-to-metal (DTM) acrylic urethane provides the ultimate corrosion protection for excellent long term appearance in aggressive environments.  Self-priming with excellent adhesion and coverage in one coat.  Extremely durable for superior color and gloss retention compared to other DTM Urethanes.  Low temperature cure down to 32 degrees F (0 C).  Excellent sag resistance ( Can be applied at high film builds, 3-5 mils recommended DFT). Accelerator available to speed drying time.  Meets USDA requirements for incidental food contact.

High solids, high-build, direct-to-metal (DTM) acrylic urethane provides the ultimate corrosion protection for excellent long term appearance in aggressive environments.  Self-priming with excellent adhesion and coverage in one coat.  Extremely durable for superior color and gloss retention compared to other DTM Urethanes.  Low temperature cure down to 32 degrees F (0 C).  Excellent sag resistance ( Can be applied at high film builds, 3-5 mils recommended DFT). Accelerator available to speed drying time.  Meets USDA requirements for incidental food contact.

High solids, high-build, direct-to-metal (DTM) acrylic urethane provides the ultimate corrosion protection for excellent long term appearance in aggressive environments.  Self-priming with excellent adhesion and coverage in one coat.  Extremely durable for superior color and gloss retention compared to other DTM Urethanes.  Low temperature cure down to 32 degrees F (0 C).  Excellent sag resistance ( Can be applied at high film builds, 3-5 mils recommended DFT). Accelerator available to speed drying time.  Meets USDA requirements for incidental food contact.

High solids, high-build, direct-to-metal (DTM) acrylic urethane provides the ultimate corrosion protection for excellent long term appearance in aggressive environments.  Self-priming with excellent adhesion and coverage in one coat.  Extremely durable for superior color and gloss retention compared to other DTM Urethanes.  Low temperature cure down to 32 degrees F (0 C).  Excellent sag resistance ( Can be applied at high film builds, 3-5 mils recommended DFT). Accelerator available to speed drying time.  Meets USDA requirements for incidental food contact.

High solids, high-build, direct-to-metal (DTM) acrylic urethane provides the ultimate corrosion protection for excellent long term appearance in aggressive environments.  Self-priming with excellent adhesion and coverage in one coat.  Extremely durable for superior color and gloss retention compared to other DTM Urethanes.  Low temperature cure down to 32 degrees F (0 C).  Excellent sag resistance ( Can be applied at high film builds, 3-5 mils recommended DFT). Accelerator available to speed drying time.  Meets USDA requirements for incidental food contact.

ACRYLITHANE HS URETHANE ENAMEL is a high performance, two component coating for use where appearance, durability, color and gloss retention plus chemical and corrosion resistance are paramount. For use on automobiles, trucks, trailers, railway cars, service stations, bulk tanks or chemical (acid or caustic) trailers.

ACRYLITHANE 2.8 is a high performance, two component coating for use where appearance, durability, color and gloss retention plus chemical and corrosion resistance are paramount. For use on automobiles, trucks, trailers, railway cars, service stations, bulk tanks or chemical (acid or caustic) trailers.

ACRYLITHANE HS2 URETHANE ENAMEL is a high performance, two component coating for use where appearance, durability, color and gloss retention plus chemical and corrosion resistance are paramount. For use on automobiles, trucks, trailers, railway cars, service stations, bulk tanks or chemical (acid or caustic) trailers.

DURETHANE® DTM is a surface tolerant, high solids, high build,two component acrylic urethane formulated for direct-to-metal applications. This product is compliant for applications in areas with VOC requirements of less than 250 g/L (2.08 lbs./gal.).

A special additive for the High Performance polyurethane finishes used to reduce drying time. The Urethane Accelerator will significantly reduce the dry time of the 9400 System High Gloss Polyester Urethane, 9700 System 250 VOC Acrylic Polyester Urethane, and the 9800 System DTM Urethane Mastic finishes with minimal effect in pot life.
QUANTITIES ARE LIMITED. PLEASE CALL (317) 991-5309.

High solids, high-build, direct-to-metal (DTM) acrylic urethane provides the ultimate corrosion protection for excellent long term appearance in aggressive environments.  Self-priming with excellent adhesion and coverage in one coat.  Extremely durable for superior color and gloss retention compared to other DTM Urethanes.  Low temperature cure down to 32 degrees F (0 C).  Excellent sag resistance ( Can be applied at high film builds, 3-5 mils recommended DFT). Accelerator available to speed drying time.  Meets USDA requirements for incidental food contact.

High solids, high-build, direct-to-metal (DTM) acrylic urethane provides the ultimate corrosion protection for excellent long term appearance in aggressive environments.  Self-priming with excellent adhesion and coverage in one coat.  Extremely durable for superior color and gloss retention compared to other DTM Urethanes.  Low temperature cure down to 32 degrees F (0 C).  Excellent sag resistance ( Can be applied at high film builds, 3-5 mils recommended DFT). Accelerator available to speed drying time.  Meets USDA requirements for incidental food contact.

High solids, high-build, direct-to-metal (DTM) acrylic urethane provides the ultimate corrosion protection for excellent long term appearance in aggressive environments.  Self-priming with excellent adhesion and coverage in one coat.  Extremely durable for superior color and gloss retention compared to other DTM Urethanes.  Low temperature cure down to 32 degrees F (0 C).  Excellent sag resistance ( Can be applied at high film builds, 3-5 mils recommended DFT). Accelerator available to speed drying time.  Meets USDA requirements for incidental food contact.

QuickClean 100 CLEAR is a low VOC specially modified polyurethane coating formulated for use in applications requiring anti-graffiti, non-stick and high surface slip characteristics. QuickClean 100 CLEAR can be used to ease removal of graffiti on buildings, allow simplicity of cleaning equipment such as cement trucks, or provide a high slip (low coefficient of friction) surface for dry bulk material container surfaces.

DURETHANE® DTM is a surface tolerant, high solids, high build,two component acrylic urethane formulated for direct-to-metal applications. This product is compliant for applications in areas with VOC requirements of less than 250 g/L (2.08 lbs./gal.).

DURETHANE® DTM is a surface tolerant, high solids, high build,two component acrylic urethane formulated for direct-to-metal applications. This product is compliant for applications in areas with VOC requirements of less than 250 g/L (2.08 lbs./gal.).

ACRYLITHANE 2.8 is a high performance, two component coating for use where appearance, durability, color and gloss retention plus chemical and corrosion resistance are paramount. For use on automobiles, trucks, trailers, railway cars, service stations, bulk tanks or chemical (acid or caustic) trailers.